|
Hanna Instruments has been providing the Hydroponics industry with the highest quality
scientific products for over a decade. Once
again, Hanna is proud to introduce NEW products to the market, the result of our valuable customers feedback. Hanna products are sold throughout a fine
network of distributors across the country. |
HANNA Instruments GROCHEK Meters
Provide continuous digital pH or EC scale read-out, designed to meet the needs of growers in greenhouses and hydroponic applications. Completely sealed against vapors and
humidity, so you can hang meter right above your sample to be tested for continuous measurement. Easy to clean and requires little maintenance. Select your own set-point and be alerted
of an abnormal situation with a flashing LED alarm. Unit runs without interruption on 12 VDC power supply. |
Hanna Combo GroChek pH/EC/TD/Temperature Combo
Hanna Model HI 991404 The new Combo GRO’CHEK from Hanna has a dual-level backlit LCD to give you instantaneous readings of pH/EC/TDS
and temperature. Simply install the meter above the reservoir and insert the electrodes into the solution for continuous readings.
The microprocessor provides automatic calibration, automatic buffer selection, automatic temperature compensation, adjustable ß and adjustable TDS ratio.
Measurements are defined as 700 ppm = 1 EC. Range of pH is 0-14 and ppm is 0-2000.
●Waterproof ●Dual-level Backlit LCD ●Extra Large Display ●12V Power Supply
|
Range | more specifications |
| pH | 0.00 to 14.00 | |
EC | 0 to 3999 µS/cm |
| TDS | 0 to 2000 ppm | |
Temp | 32.0 to 140.0°F or 0.0 to 60.0°C |
| Accuracy | | |
pH | ±0.05 |
| EC/TDS | ±2% F.S. | |
Temp | ±1°F or ±0.5°C |
|
HY1743 $ 239.95

Add to Cart
|
 |
Replacement Probe for Hanna Model HI 991404 pH/EC/TD/Temperature Combo |
HY17431 $ 93.95
Add to Cart |
Hanna GroChek pH Meter
Runs off a simple transformer. The electrode sits in your water or nutrient tank and provides real time pH monitoring. The HI 1286 gel-filled pH electrode
is interchangeable and the BNC connector is protected behind a waterproof sheath. The unique design of the electrode provides longer life in fertilizer solutions with high concentration of
phosphate and nitrate. The pH GroChek is also supplied with a differential input and HI 1283 stainless steel probe to prevent potential
grounding problems and thus ensuring longer life for your electrode. You can set your own set point and be alerted of an
abnormal situation with a flashing LED alarm. Measurements are highly accurate and the meter can be calibrated at one or two points. Unit
runs without interruption on 12 VDC power supply. |
HY181
$110.00
Add to Cart |
 |
Replacement Probe for Hanna Gro Chek meter series. Replaces the pH electrode in all models of the Grow Check. |
HY1801 $49.00 Add to Cart |
 |
Hanna GroChek TDS Meter Meter comes with a probe that compensates for the temperature variation automatically.
The probe is easy to clean and requires little maintenance. Measurements are highly accurate and the meters can be calibrated at one point. In addition,
the TDS GroChek uses a specially devised formula which perfectly reflects the needs of growers. In fact, the common method of measuring TDS
by multiplying the conductivity by 0.5 which is far off the mark in horticulture with high concentrations of phosphate, nitrogen, etc. |
HY180 $105.95 Add to Cart |
 |
Hanna GroChek EC Meter
Provides continuous digital EC scale read-out. This scale is the international Electro Conductivity scale. No alarm light.
The EC scale is not linear to Parts Per Million. The new PPM meters for horticulture are being built to the specs of .7 to 1 or 700 PPM to 1 EC.
For those who use the Conductivity Factor (CF) scale 1 EC = 10 CF. CF was created to eliminate tenths of an EC. Example: 1.5 EC = 15 CF. EC
is multiplied by 10 to reference CF. | HY1791 $105.95
Add to Cart |
| More Hanna Industries Meters |
Hanna pH Hand-held Meter
pHep®4 Waterproof pH & Temperature Testers temperature compensating for easy and quick measuring.
The Hanna pHep® 4 includes features such as waterproof casing that floats, dual-level LCD, temperature in °C and °F, battery level indicator,
replaceable pH electrode cartridge, stability indicator, automatic shut-off and automatic calibration. These testers are beyond your expectations!
●Waterproof, Floating ●Large, Dual-level LCD ●Stability Indicator ●% Battery Power Illumination
●Automatic Shut-off ●Automatic Calibration ●Replaceable pH Electrode Cartridge. No Pins to Bend or Break!
|
HI 98127 (pHep®4) | | Range |
more specifications |
| pH | 0.0 to 14.0 |
| Temp | 32.0 to 140.0°F or 0.0 to 60.0°C | | Accuracy | | |
pH | ±0.1 | | Temp | ±1°F or ±0.5°C |
|
HY174 $ 94.95

Add to Cart |
Hanna Combo Waterproof pH/EC/TDS/Temperature Tester
Model HI 98129 Hanna Combo waterproof testers are designed for high accuracy pH, EC/TDS and temperature measurements. Hanna testers are technologically advanced
and have a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts
and other substances. ●Waterproof, Floating ●Battery Power Illumination ●High Accuracy ●Large Dual-level LCD
●Adjustable TDS Ratio ●Adjustable Automatic Shut-off ●Automatic Calibration ●Replaceable pH Electrode Cartridge
| Range |
more specifications |
| 0.00 to 14.00 | | EC | 0 to 3999 µS/cm |
| TDS | 0 to 2000 ppm | | Temp | 32.0 to 140.0°F or 0.0 to 60.0°C |
| Accuracy | | | pH | ±0.05 | |
EC/TDS | ±2% F.S. |
| Temp | ±1°F or ±0.5°C |
| HY1741
$ 164.95
Add to Cart |
 |
Replacement Probe for Hanna Model HI 98129 and HI98127 pH/EC/TDS/Temp Combo |
HY17411 $57.95 Add to Cart |
Hanna Model HI 98311 Waterproof EC/TDS/Temperature Tester
This Hanna meter includes features such as a waterproof casing that floats, adjustable TDS ratio,
temperature in °C and °F, adjustable ß, Automatic shut-off and automatic calibration. This tester is unmatched in EC/TDS/Temperature measurement
●Waterproof, Floating ●Battery Power Illumination ●Large Dual-level LCD
●Adjustable TDS Ratio ●Adjustable ß ●Automatic Shut-off ●Automatic Calibration
| HI 98311 (DiST®5) |
more specifications |
| Range | |
| EC | 0 to 3999 µS/cm | |
TDS | 0 to 2000 ppm |
| Temp | 32.0 to 140.0°F or 0.0 to 60.0°C | |
Accuracy | | | EC/TDS | ±2% F.S. | |
Temp | ±1°F or ±0.5°C |
| HY 1742
$ 102.95

Add to Cart |
|
Hanna pH Checker 1 (LIQUIDS ONLY) Digital readout. Not temperature compensating but a very good
value. We don't get many of these returned so we keep on selling them.Out-performs their more expensive models. Replaceable electrode.
directions | HY1861 $39.95
Add to Cart |
 |
Replacement Electrode for HANNA pH Checker 1 |
HY190 $24.95
Add to Cart |
 |
Hanna GroChek Combo Model HI9813-6
Portable for a display of TDS, pH, EC, and Temperature in your hydroponic reservoirs specifications |
HY178 $222.95 Add to Cart |
 |
Replacement Probe for Hanna Model HI9813-6 HI1285 PROBE FOR HI9813-6 |
HY1781 $ 94.95 Add to Cart |